Flying insects can be a real pest annoyance.
With the dual function of the insect catcher no insect will be safe.
From fly's to moths all bring problems.
Get permanent protection with the 15-watt LED insect catcher.
If insects are controlled with chemical pesticides, they can over time develop immunity and the effectiveness of the poisons used diminishes. It is therefore advisable to stop using chemicals for sustainable insect control. The 15 Watt LED insect catcher is a suitable alternative. The ultraviolet LED light that it emits reliably attracts flies and insects without having a detrimental effect on the environment.
The killing process using the fan is innovative and has absolutely proven itself. The insects fly towards the ultraviolet light and are caught in an air stream from which they cannot escape and which kills them by dehydrating them. The dead insects then fall into a container that can be freely removed and easily emptied.
1. Asses the area to be protected.
Use the metal bracket supplied to fix the appliance to a wall or place it at a height where children and pets cannot reach it (2 meters or more high is recommended).
2. Mount the device and plug into the socket.
Connect to the appropriate mains electrical supply with the plug provided. For best results, place the unit on the wall opposite the window at a height of approx. 2m or install it. The insect catcher should be in operation day and night.
3. Empty the tray and Clean the device regularly.
Your Insect Catcher should be cleaned weekly (more often if there are high levels of insects present). Clean the fan blades, the plastic grid at the back of the unit (turn it anticlockwise to take it out) and the inside of the housing. Empty the dead insect collection tray in the base by pulling it out.
1. Asses the area to be protected.
Use the metal bracket supplied to fix the appliance to a wall or place it at a height where children and pets cannot reach it (2 meters or more high is recommended).
2. Mount the device and plug into the socket.
Connect to the appropriate mains electrical supply with the plug provided. For best results, place the unit on the wall opposite the window at a height of approx. 2m or install it. The insect catcher should be in operation day and night.
3. Empty the tray and Clean the device regularly.
Your Insect Catcher should be cleaned weekly (more often if there are high levels of insects present). Clean the fan blades, the plastic grid at the back of the unit (turn it anticlockwise to take it out) and the inside of the housing. Empty the dead insect collection tray in the base by pulling it out.
4. Enjoy insect free.